The application advantages of CAPS buffer in flux

Release time:

2024-05-03


CAPS buffer, also known as 3- (cyclohexylamino) -1-propanesulfonic acid, is a compound with a unique structure and properties. CAPS buffer plays an important role in multiple fields, especially in soldering fluxes. Through its unique chemical structure and properties, CAPS plays multiple roles in flux, such as acid-base regulation, surface tension reduction, and oxidation resistance, thereby improving the stability and reliability of the welding process and improving welding quality.

 

CAPS buffer

 

The application advantages of CAPS in flux

 

Firstly, the structure of CAPS contains cyclohexyl and amino groups, which gives CAPS the ability to regulate acidity and alkalinity. In flux, CAPS can adjust the pH value of the flux to adapt to different substrates and welding requirements. This helps to ensure the stability and reliability of the welding process, prevent excessive corrosion of the substrate, and improve welding quality.

 

Secondly, the sulfonic acid group of CAPS endows it with excellent buffering performance. During the welding process, the pH value of the flux may change due to temperature changes, chemical reactions, and other factors. The buffering effect of CAPS can neutralize these changes, maintain the pH stability of the flux, and ensure a smoother welding process.

 

In addition, the structure of CAPS also enables it to reduce surface tension. In flux, CAPS can reduce the surface tension of the liquid, which helps the flux better wet and spread on the surface of the welded substrate. This can not only improve the reliability of welding, but also optimize the welding process, reduce welding defects and defect rates.

 

The antioxidant performance of CAPS is also an important aspect of its application in flux. During the welding process, oxidation reactions may occur, leading to the failure of the active components in the flux. CAPS can delay this oxidation process, improve the stability and service life of the flux.

 

How to apply CAPS to soldering flux

 

Firstly, during the formulation design phase of the flux, engineers will determine the amount of CAPS added based on the required welding requirements and substrate type. The amount of CAPS added needs to be calculated and experimentally verified to ensure its good performance in the flux.

 

Secondly, during the preparation process of flux, CAPS will be mixed with other components such as solvents, surfactants, corrosion inhibitors, etc. By means of physical treatment such as stirring, heating, or cooling, CAPS is thoroughly mixed with other components to form a uniform flux solution.

 

After welding is completed, CAPS and other components in the flux may need to be cleaned or removed to prevent adverse effects on the welded joint. During the cleaning process, the solubility of CAPS enables it to be effectively removed, ensuring the quality and reliability of welded joints.

 

 

Product packaging

 

Overall, as a compound with unique structure and properties, CAPS has demonstrated its important application value in flux. As a direct manufacturer of biological buffer, Desheng always insists on providing customers with high-quality products. With the increasing demand for material performance, we believe that Desheng will use its strength to prove that choosing it is not wrong.