Instructions for the use of trimethylaminomethane hydrochloride
Release time:
2023-09-26
Tris HCl, commonly referred to as Tris HCl, is a commonly used laboratory reagent used to regulate the pH value of solutions. Due to the powder state of its finished product, it is necessary to pay attention to correct operation during use, strictly follow the instructions, and avoid unnecessary trouble caused by improper operation, which may lead to experimental failure.
1、 Powder dissolution
To prepare Tris HCl as a buffer solution, the powder needs to be dissolved in distilled water to ensure pure water quality; Weigh the required Tris HCl powder using a balance and pay attention to accurate weighing to ensure the accurate pH value of the prepared buffer solution. Slowly add Tris HCl powder to distilled water while stirring to avoid pouring the powder in at once, then continue stirring until Tris HCl is completely dissolved.
2、 PH regulation
Adjust the pH value of Tris HCl buffer to a specific range according to experimental needs. Using hydrochloric acid or alkaline solution, gradually add to Tris HCl buffer. After each addition, measure the pH value of the solution using a pH meter until the target pH value is reached. Be careful when approaching the target pH value to avoid overshoot.
3、 Temperature control
Tris HCl buffer is stable at room temperature, but does not tolerate high temperatures. Therefore, when preparing and storing Tris HCl buffer, it is important to avoid placing it in a high-temperature environment to avoid reducing its quality and efficacy. If heating is required, simply heat it slightly to the extent that Tris HCl powder is dissolved, and do not heat it to boil.
4、 Storage
Proper storage can extend the shelf life of Tris HCl. Store the prepared Tris HCl buffer in a dry, dark container to prevent moisture absorption and photosensitive reactions. Regularly check the pH value of the buffer to ensure its stability, and avoid exposing it directly to high temperatures and humidity.
5、 Safety precautions
When using Tris HCl hydrochloride, please follow safety precautions, wear appropriate personal protective equipment, including laboratory coats, gloves, and goggles, and avoid direct contact with skin and eyes. If accidentally touched, immediately rinse with plenty of water and operate in well ventilated laboratory conditions to reduce the risk of inhalation.
The correct use of Tris HCl is the key to ensuring the stable performance of the experimental solution. As an advantageous manufacturer of biological buffers, Desheng can provide white raw material powder with high purity and good water solubility for users to prepare and use, which is convenient and simple. Currently, the number of purchasing customers has increased, and the prices are favorable. If you have any interest, please feel free to contact us for purchase!
Previous page
Previous page
News
Contact details
Contact number
Address: C8, Guanggu United Science and Technology City, Ezhou City, Hubei Province
Fax：0711-3704 589
Follow us
